The Demand Charge
Subject area

Power Factor and Power Quality

Reactive power does no useful work and still has to be carried by the wires, which is why utilities bill for it. A low power factor shows up as an explicit penalty line, as a kVA-based demand charge, or as a multiplier applied to billed kilowatts, depending on the tariff — and the three are not equivalent, so a correction that pays back on one schedule may not on another. This section covers the power triangle, how to read a power factor penalty clause, capacitor bank sizing and the harmonic risks that come with it, active correction, and how variable frequency drives interact with displacement power factor. Also here: voltage level discounts, transformer ownership credits, and what primary metering changes on the bill.

Power factor

Power Factor Penalties Explained

Reactive power does no useful work and still has to be carried by the wires. Three different tariff mechanisms bill you for it, and they are not equivalent.

8 min read

Supporting analysis

Everything underneath the pillar, in this subject area.

Power factor

Sizing a Capacitor Bank

The calculation is short and the target is not maximum correction. Sizing to land inside a band, with the harmonic environment checked first, is what separates a working installation from a failure.

5 min read
Power factor

Voltage Level Discounts and Primary Metering

Taking service at a higher voltage and owning your own transformer moves cost from the utility to you, and tariffs pay for that with a discount. Whether it is worth it is arithmetic.

4 min read
Power factor

kVA Billing and kW Billing

Two tariffs can charge for demand in different units, and the choice of unit decides whether a capacitor bank is a strong investment or a complete waste.

4 min read